SIMPLIFY 3D PRINTER PROFILES HOW TO
SIMPLIFY 3D PRINTER PROFILES UPDATE
SIMPLIFY 3D PRINTER PROFILES PRO
SIMPLIFY 3D PRINTER PROFILES SOFTWARE

SIMPLIFY 3D PRINTER PROFILES UPDATE

For any changes you ever need to make to the machine settings, you can change them right here for instance, my SuperPrinter 3000 has a wider build platform, itвЂ™s 300Г—300, so I need to update these numbers. IвЂ™ll go to the G-Code tab, I can see that both these options are already enabled. Since I know IвЂ™m going to be using this printer along with the other printers, I want to make sure my machine and firmware settings will be synced properly. My printer is called the SuperPrinter 3000. LetвЂ™s pretend IвЂ™m designing my own printer and I know itвЂ™s very similar to the Prusa Mendel, so IвЂ™ll select that profile and Save as New, which will create a new profile based on the Prusa Mendel settings.

SIMPLIFY 3D PRINTER PROFILES HOW TO

But, some of you out there may be building a custom machine or using a printer that isnвЂ™t already in the Simplifењ“D database, so in that case, letвЂ™s talk about how to set this up.

In most cases, you wonвЂ™t need to mess with any of these settings, because as I mentioned, the default profiles in Simplifењ“D have all this taken care of. I click OK, you see things are updated once again. So if I go to Edit Process Settings and choose the Lulzbot Taz 5, and look under the G-Code tab, youвЂ™ll see this profile also has the machine and firmware overrides enabled.

Now letвЂ™s check the firmware settings - we can tell that itвЂ™s now using the Makerbot/Sailfish firmware, and we can see we have the added X3G tab, which is what we would expect since these printers use X3G files.Д«ut letвЂ™s say later in the day I want to print on the Lulzbot. YouвЂ™ll see that a lot these settings have changed. IвЂ™ll click OK, and you can probably already see in the main window here that my machine settings have been updated, but letвЂ™s verify that. YouвЂ™ve probably noticed this if youвЂ™ve used the Configuration Assistant before. All of the profiles you use from Simplifењ“D already have this built in, making it much easier to switch between printers. So whatвЂ™s happening here is that weвЂ™ve connected our process settings, machine settings, and firmware settings so that they all change together. If these boxes are checked, your machine settings and your firmware configuration will be automatically updated based on the settings you have chosen. I want to point out two areas here on the right: the Machine Definition and Firmware Configuration. In previous videos weвЂ™ve talked about how the profiles that you choose automatically adjust the process settings to whatвЂ™s optimized for that printer. So you can see I have those two printer profiles loaded.

SIMPLIFY 3D PRINTER PROFILES PRO

There are two printers I am planning to use today, the Flashforge Creator Pro and the Lulzbot Taz 5. What we really want to talk about today is how Simplifењ“D automatically manages these settings for you. The most common firmwares are already included. This window defines the language that your 3D printer uses to communicate.

Now letвЂ™s go look at our firmware settings. On this tab you can see there are settings like what type of printer, such as cartesian or delta, and some basic things like the build volume, orientation and coordinate system. If youвЂ™re on a Mac, you would go to Simplifењ“D then Preferences to get to this window. You can set up your machine settings by going to Tools, Options, Machine tab. So let me show you where both of these things can be set up in Simplifењ“D.

SIMPLIFY 3D PRINTER PROFILES SOFTWARE

Using the second extruder for soluable support on the other hand is as easy as a few mouse clicks if the printer configuration is correct.For the software to correctly interface with your printer, it needs to know some details about the hardware youвЂ™re using second, it needs to know how to communicate with your printer, which is typically determined by what type of firmware itвЂ™s running. I've yet to find a clean and easy way to do dual color extrusion, I've always been able to get the result I want in either Simplify or Cura but it's a PITA in both. To do dual color print is a whole different thing, you need to merge two STL files and assign one of the extruders to each using a process for each extruder/color. I installed an E3D Chimera on my SD3 and then added the second extruder to the printer profile and it worked fine by using the above method. If you're not seeing the secondary extruder as an option or it's using the primary extruder settings then there's something wrong with the printer setup. From there you can go to the temperaqture tab and set the second extruder to the appropriate temperature. It's actually very simple to specify using the second extruder for support, in the process settings just go to the support tab and in the support extruder box click on the drop down arrow and select secondary extruder.

Simplify 3d printer profiles